Accessoires/Pièces

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Il suffit d'insérer le Hitch Tite de Saris dans le récepteur d'attelage pour donner à votre porte-vélos Saris (vendu séparément) une stabilité supplémentaire. Le Hitch Tite est compatible avec les supports Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On et T-RAX Sport.

L'ensemble d'adaptation Thule Xadapt 1 permet de connecter les porteurs Thule aux barres de charge Thule Rapid ou Xsporter. Veuillez nous contacter pour toute question concernant la compatibilité.

Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily to available bolt heads under the hood - Boat bow & stern tie-down loops that are fastened inside the vehicle hood and protrude out through the edge to provide a secure loop to attach tie-downs

Long Wheel Replacement Straps (2 Pack)

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

The Thule Xadapt 7 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

An adapter to enable safe transport of bikes with carbon frames. Features - The fixation pressure is distributed over a large surface area to minimize risk of frame damages - It fits all types of frame geometries and is easily adjustable with no loose parts - The adapter has a soft TPE rubber liner to avoid scratching the bike frame - Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

Thule's No-Sway Cages stabilize and prevent bike-to-bike contact on your hitch-mounted rack. They're only compatible with Thule's T3 cradles. You get 2 per pack (enough for 2 bikes).

Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily by placing under hood or trunk and is secured by the closed lid - Boat bow & stern tie-down loops that are fastened inside the vehicle hood or trunk hatch and protrude out through the edge to provide a secure loop to attach tie-downs to

- SportRack Hitch Pin Bolt with Lock - For SportRack Hitch Mounted Bike Racks

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

Two heavy-duty straps with cam-action buckles secure heavy loads while our patented buckle bumpers help to prevent vehicle scratches and dings. - Each strap features steel cam-action buckles and protective Buckle Bumpers that fit snugly over buckles to protect vehicle and load at all times - Packaged as a pair - 15-foot length or 9-foot length

Easily mount your license plate to the platform and hanging hitch bike carriers. - Provides an unobstructed view of vehicle tag for improved visibility - Versatile attachment straps can be secured to both horizontal and vertical surfaces (rack or bike) - Integrated light for nighttime plate visibility conforms to FMVSS108 safety standards and includes a universal four-pin connector with quick connection - Easily rotate holder on the carrier for use in 'stowed' or 'in-use' position - Captured attachment mechanism inhibits tampering of license plate

Capacité de transporter des vélos avec des fourches à déclenchement rapide de 9 mm et des diamètres d’axe traversant 12 x100, 12 x110, 15 x100, 15 x110 avec la broche de 9 mm existante et les nouveaux adaptateurs d’axe traversant Capacité de chargement en poids de vélo de 40 lb/18,1 kg par vélo Bloc de fourche pouvant être installé sur des surfaces planes (applications à fixation personnalisée) Dégagé de tous les étriers de freins à disque

Adapt your Swagman bike rack to accommodate fat bikes with wheel trays specifically made for extra-wide tires. - Fat Bike Wheel Holder (set includes 1 inner, 1 outer wheel tray) - For use with Swagman's Quad 2+2 or Chinook bike racks

Nobody's getting close to your bike with Saris' Locking Cable and Hitch Tite Combo. The Hitch Tite secures your rack to the car and is compatible with all current Saris Hitch Racks (sold separately). For additional protection, the included 8-foot, 10mm cable locks your bike to the rack. Walk away from your car knowing that others will only be able to admire your wheels from afar.

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Fat Tire holder for T2 PRO X

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

Rampe pliable pratique pour un chargement et un déchargement faciles de vos vélos. Évitez de grands efforts physiques en faisant simplement rouler le vélo sur le support pour vélos. La rampe peut être intégrée au support pour vélos pour un rangement pratique lorsque vous ne l’utilisez pas.

Provides clearance for spare tires, barn doors, and tailgates when using a hitch bike carrier. - Two-position extension, 7" and 9", clears spare tires and allows for use of platform and hanging hitch carriers - 250 lbs weight limit carrying capacity - Provides a 2.25" drop for improved tailgate/rear door clearance - Bolt fixation to vehicle - Accommodates hitch rack bike carriers with a 2" stinger (Not for towed use)

High-grade bike lock developed with ABUS High-quality lock for added security and protection against theft, developed with ABUS. The robust cable has a length of 150 cm and a thickness of 1,2 cm. The lock is compatible with both the two-bike and the three-bike carrier. Maximum security High grade bike lock with loop cable offers added security High quality bike lock for your bikes Developed with ABUS Easy to install Tool-free installation of lock to bike carrier

This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

La rampe et le pont Swagman facilitent le chargement des vélos lourds ! La rampe télescopique repose sur le Swagman E-Spec, Current ou G10, vous permettant de faire rouler votre vélo le long de la rampe et dans les plateaux de roues. Le pont repose entre les plateaux de roues, ce qui facilite la mise en place du vélo avant de l'attacher avec les bras à cliquet du porte-vélos. Lorsqu'elle n'est pas utilisée, la rampe se raccourcit et le pont s'emboîte sur le dessus pour un rangement facile. Cette rampe et ce pont (66690) sont compatibles avec les porte-vélos E-Spec, Current et G10. Capacité de charge maximale : 80 lb Traduit avec DeepL.com (version gratuite)