Accessoires/Pièces

An adapter to enable safe transport of bikes with carbon frames. Features - The fixation pressure is distributed over a large surface area to minimize risk of frame damages - It fits all types of frame geometries and is easily adjustable with no loose parts - The adapter has a soft TPE rubber liner to avoid scratching the bike frame - Only to be used with Thule bike racks with a torque limiter knob (e.g. Thule ProRide 598003, Thule EasyFold, Thule DoubleTrack 9054, Thule Raceway 9003PRO)

This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection

A set of extra-long replacement wheel straps to enable transport of very large-tire fat bikes. - Fits Thule EasyFold XT bike racks

L'ensemble d'adaptation Thule Xadapt 1 permet de connecter les porteurs Thule aux barres de charge Thule Rapid ou Xsporter. Veuillez nous contacter pour toute question concernant la compatibilité.

Thule's Frame Adapter is an ingenious solution for carrying bicycles without standard top tubes (for example, some dual-suspension, BMX and step-through frames), on rear-mounted car racks. The Frame Adapter attaches quickly and easily and lets the rack carry your bike securely.

Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key

Thule's Snug-Tite Receiver Lock secures their T2, Doubletrack, Roadway, and Parkway receiver-type racks (also called "hitch racks"). Just insert the Snug-Tite in place of your receiver pin and the rack is locked in place.

Fat Tire holder for T2 PRO X

Provides clearance for spare tires, barn doors, and tailgates when using a hitch bike carrier. - Two-position extension, 7" and 9", clears spare tires and allows for use of platform and hanging hitch carriers - 250 lbs weight limit carrying capacity - Provides a 2.25" drop for improved tailgate/rear door clearance - Bolt fixation to vehicle - Accommodates hitch rack bike carriers with a 2" stinger (Not for towed use)

Adapt your Swagman bike rack to accommodate fat bikes with wheel trays specifically made for extra-wide tires. - Fat Bike Wheel Holder (set includes 1 inner, 1 outer wheel tray) - For use with Swagman's Quad 2+2 or Chinook bike racks

- SportRack Hitch Pin Bolt with Lock - For SportRack Hitch Mounted Bike Racks

- Converts 1-1/4" Hitch Receiver to fit 2" Hitch - Compatible with all current Saris Hitch Racks (contact Saris for older model compatibility).

Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).

Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.

Il suffit d'insérer le Hitch Tite de Saris dans le récepteur d'attelage pour donner à votre porte-vélos Saris (vendu séparément) une stabilité supplémentaire. Le Hitch Tite est compatible avec les supports Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On et T-RAX Sport.

Nobody's getting close to your bike with Saris' Locking Cable and Hitch Tite Combo. The Hitch Tite secures your rack to the car and is compatible with all current Saris Hitch Racks (sold separately). For additional protection, the included 8-foot, 10mm cable locks your bike to the rack. Walk away from your car knowing that others will only be able to admire your wheels from afar.

Saris' Locking Hitch Tite adds both stability and security to your hitch rack. It tightens up the interface between your rack and hitch to combat swaying and it locks your rack to your vehicle. It fits 1-1/4 and 2-inch threaded hitch-tites and is compatible with the 200/500 Series T-Rax, all Thelma racks, standard-model Cycle-Ons, and all the T-Bones racks (each sold separately).

An RV compatible 2" hitch base for use with any SuperClamp 2-bike hitch rack. - Make your existing SuperClamp 2-bike hitch rack RV compatible (Class A, B, & C Motorhome). - A 2-inch base compatible with all SuperClamp 2-bike hitch racks (4025, 4025C, 4025F, 4026F). - For use with 2" receivers only. - Hitch pin and hardware sold separately.

Swing into Action Turn your Saris hitch rack into a swing away with this hitch rack accessory. Featuring 90° of pivot, the Swing Away Accessory gives you free and clear hatch access without removing your bikes. Designed to handle up to 250 lb. of rack plus bike weight, the Swing Away Accessory is compatible with our most popular hitch racks – including the Freedom and SuperClamp platform hitch racks. Convenient and built-in carrying handles make it easy to maneuver and install, while the included Hitch Tightener ensures secure travels down the road. For those times when only a swing away will do, there’s the Saris Swing Away Accessory. Product Features - Turns your favorite Saris hitch rack into a swing away. - Pivots 90° and locks in open position. - Carries up to 250 lb. of rack + bike weight. - For use with 2” receivers only. - For specific rack model compatibility see specifications below. Rack Compatibility - Compatibility information for Saris hitch racks - Compatible with bikes up to 35 lb. per bike tray for the following models: - SuperClamp EX 2-Bike (4025F) - SuperClamp HD 2-Bike (4025HD) - Freedom EX 2-Bike (4412F) - Freedom 2-Bike (4412B) - Glide EX 4-Bike (774) - Compatible with bikes up to 60 lb. per bike tray for the following models: - MTR 1-Bike (4031) - MTR 2-Bike (4032) - Tilting/folding feature of Freedom, SuperClamp or MTR racks can be used when on the Swing Away Accessory in the "closed" position. - Gliding feature of the Glide EX is not recommended when installed on Swing Away in the "closed" or "open" (swung away) position. - Check with your hitch rack manufacturer (non Saris) to see if your existing hitch rack can be used with extenders. Product Design - Swings away to 90° for full vehicle hatch access. - For use with 2” receivers only. - Weight capacity: 250 lb. (rack, plus bikes). - Hitch Tightener system securely locks hitch into place, securing the base to your vehicle. - Two integrated carrying handles.

Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.

Protégez votre vélo et votre voiture durant vos déplacements. Grâce à sa fabrication rembourrée et renforcée en nylon hydrofuge, le RIDE SHIELD protège l'intérieur de votre véhicule contre l'huile, la graisse et la boue, tandis qu'un rabat extérieur protège la peinture de votre vélo et de votre véhicule contre les égratignures lors du chargement et du déchargement. Lorsque vous laissez votre vélo sans surveillance dans une voiture stationnéee, la couverture de sécurité intégrée et les grandes poches de rangement du RIDE SHIELD gardent votre vélo et votre équipement hors de vue pour une tranquillité d'esprit totale. Protection rembourrée qui prévient les dommages au véhicule Couverture de sécurité pour garder le vélo hors de vue Durable, hydrofuge et résistant aux rayons UV Compartiment à roue pour empêcher le mouvement et d'endommager la peinture du vélo Poche de rangement à fermeture automatique pour l'équipement et les accessoires de vélo Convient à tous les types de véhicules

The Thule Xadapt 7 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

The Thule Xadapt 8 Adapter Kit makes it possible to connect Thule carriers to Thule Professional load bars. Please contact us with any questions regarding compatibility.

An adapter set for Thule FastRide to enable transport of bikes with 9-15mm thru-axles. - Enables transportation of bikes with 9-15mm thru-axles

With Thule's Fat Tire Kit for T2 Racks you can finally throw your fat bike on your Thule rack (sold separately) and head for the hills. Oversize wheel trays accommodate tires up to 5-inches wide and the tray has been shaped to work perfectly with even the widest treads. An extra-long wheel strap is included to make fastening your rear wheel a breeze. This kit attaches easily to your Thule T2 hitch rack (sold separately) and includes the mounts needed for a single bike.

Custom fit kit for mounting a Thule roof rack to vehicles with flush railings. Fit cars - Audi A4 Avant 5-dr Wagon with Flush Rails 2009 – 2012 - Audi Q5 5-dr SUV with Flush Rails 2009 – 2017

Custom-fit kit for mounting a Thule roof rack to vehicles without pre-existing roof rack attachment points, or factory-installed racks. - Fit kit for vehicles without pre-existing roof rack attachment points or factory-installed racks - Compatible with Thule Evo Clamp and Thule Edge Clamp foot packs - Check the Thule Buyer's Guide to find out which fit kit fits your car

Long loop strap provides anchor point for boat and load straps on vehicles without undercarriage attachment points. - Installs easily to available bolt heads under the hood - Boat bow & stern tie-down loops that are fastened inside the vehicle hood and protrude out through the edge to provide a secure loop to attach tie-downs

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet

You bought a Thule Podium Rack and now you need to match the feet to the roof of your car; don't sweat it. The Thule Podium Fit Kit arms you with the four pebax-coated, car-specific brackets and custom-fitted, rubberized footpads you need to mate the feet