Filter By:
Jeu de Directions

$59.99
Pièce de rechange d'usine, fabriquée par FSA
Spécifications et caractéristiques du jeu de direction giant pour route 1.1/8-1.1/4in
Tous les vélos de route Giant avec des tubes de direction Overdrive de 11/8" à 1 1/4" de diamètre

$99.99
- 1-1/8" / 1-1/4", 45°/ 45° ACB
- Compatible with carbon or alloy head tubes
- For tapered 47mm / 52mm OD head tube
- For 1-1/8" to 1-1/4" tapered fork
- Alloy top cover
- Upper : 1-1/8" angular contact bearing black seal)
- Lower : 1-1/4" angular contact bearing (black seal)
- Stack height 15.6+1=16.6mm
- 74 grams

$89.99
- Bearing Type: Cartridge
- Weight: 86 g
- Crown Race: 40
- S.H.I.S Lower: IS52
- S.H.I.S Upper: IS42
- S.H.I.S. Stem Clamp Diameter: 28.6 Threadless

$113.99
The FSA Orbit Z headsets feature a very low-profile design primarily for ATB and are compatible with Cane Creek internal style headsets.
- "Zero-Stack"/Cane Creek compatible
- Very low profile designed primarily for Mountain Bikes
- Patented alignment tip for increased durability and performance
- TH brand 36-degree Micro Angular Contact Bearings (red seal)
- 7075 alloy crown race
- Laser etched aluminum top cap
- Weight: 89g

$16.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 41 and 42mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Lightweight aluminum construction

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 47mm lower headset bearings
- Compatible with 33mm (1-1/4") tapered steerer tubes
- Lightweight aluminum construction

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Lightweight aluminum construction
- Allows the installation of a straight steerer fork without changing out the headset lower

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements

$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 40mm (1-1/2") tapered steerer tubes
- Lightweight aluminum construction

$104.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: EC44/40/H12/x
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.76mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Material: 7075 aluminum
• Weight: 61.02g

$219.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warranty

$114.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets. And, the 110 comes with an amazing 110-year, no-questions-asked warranty!
- Technical Description: IS41/28.6/H9/x
- Top Type: IS - Integrated
- Top Head Tube Inside Dia.: 41.1mm
- Stem Clamp Dia.: 28.6mm
- Top Stack Height: 9mm (Short), 15mm (Tall)
- Top Bearing Type: Top-quality, sealed stainless steel bearings
- Material: 7075 aluminum
- Weight: 41.81g

$69.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
• Technical Description: IS52/30/H1
• Bottom Type: IS - Integrated
• Bottom Head Tube Inside Dia.: 52.1mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Aluminum, Dual-Seal
• Bottom Stack Height: 1mm
• Bottom Bearing Type: Top-quality, sealed stainless steel bearings
• Weight: 45.25g

$104.99
This is the Bottom External Cup for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

$214.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!

$219.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warrranty

$69.99
This is the Integrated Bottom Bearing for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.

$104.99
This is the Bottom for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1.5-inch crown race diameter
- Stack height: 4mm
- 54 grams

$116.49
This is the Short Top Cover for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1 1/8-inch fork/headset
- Stack height: 8mm
- 53 grams

$169.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Aluminum dual seal crown race protects lower bearing
- Interlok spacer compatible
- 110 year warranty

$114.99
Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Integrated bearings fit directly into compatible head tubes without the need of a bearing press.
- Sealed stainless steel bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- 7075 T-6 aluminum cups machined in Fletcher, NC
- Interlok spacer compatible
- 110 year warranty

$104.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 110 headsets.
Technical Description: ZS56/30/H4/x
Bottom Type: ZS - ZeroStack
Bottom Head Tube Inside Dia.: 55.95mm
Crown Race Seat Dia.: 30.015mm
Crown Race Type: Aluminum, Dual-Seal
Bottom Stack Height: 4mm
Bottom Bearing Type: Top-quality, sealed stainless steel bearings
Material: 7075 aluminum
Weight: 61.34g
Part Number: BAA0156x

$49.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC34/28.6/H16/K
• Top Type: EC - External Cup
• Top Head Tube Inside Dia.: 33.95mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 16mm
• Top Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 50g

$59.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC44/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 44.00mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 65g

$59.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: EC49/40/H12/K
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 76g
Page 1 of 2
Next page