- Show More Brands
- Show Fewer Brands
Designed for safe transport of up to two bikes on your pickup. Securely mount your bikes while protecting your tailgate from damage. Ideal for MTBs Specifications 770g, 83 x 57 x 2cm We recommend vinyl wrapping the tailgate to prevent rub marks from dirt and grit trapped between the tailgate and the tailgate pad. It is also recommended to apply protective tape on the bike's downtime where it makes contact with the tailgate pad to prevent scratching on the frame.
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
Thule's AeroBlade Edge (Flush Mount) is an integrated foot/load bar with a low-profile, aerodynamic design for vehicles without a factory rack. The AeroBlade bars use BoxBeam construction, making them some of the strongest load bars on the market with a capacity of up to 165 pounds. In addition to their wing-like shape, the AeroBlades sport a textured surface that greatly improves wind flow so you get drastically reduced noise and much better gas mileage. These flush-mount feet will need a fit kit for your specific vehicle (sold separately).
Pied durable et facile à installer qui se fixe à une grande variété de rails surélevés. Outil intégré permettant une installation et un démontage rapides. La sangle d’acier revêtue de caoutchouc permet d’installer fermement le pied sur les rails surélevés. Se fixe au toit avec les verrous Thule One Key (vendus séparément). Consultez le guide d’achat Thule pour déterminer quel support de toit convient à votre véhicule.
This 53" long ramp, for use with Thule EasyFold XT, makes it easier to load and unload bikes, especially for taller SUV's and vans. Features - Quickly load and unload bikes from taller vehicles by adding this longer ramp (53") to the Thule EasyFold XT - Easily attach the ramp to the Thule EasyFold XT wheel tray using the tongue and groove connection
L'ensemble d'adaptation Thule Xadapt 1 permet de connecter les porteurs Thule aux barres de charge Thule Rapid ou Xsporter. Veuillez nous contacter pour toute question concernant la compatibilité.
Fully adjustable, upright bike carrier designed for the inside of the truck bed. Features - Quickly secure the bike without frame contact using the ratcheting arm - Ideal for carbon frames, mountain, downhill, ebikes and fat bikes - Accomodates wheel sizes from 20 - 29" and up to 5" tire - Lock bike to rack using Thule's One-Key system (lock included) - Holds 1 bike up to 50lbs - Fits all pickup tailgates - No bolting or drilling required Technical specifications - Max number of bikes: 1 - Dimensions: 40.6 x 18 x 6.7 in - Weight: 11 lb - One Key System compatible
Install or replace all lock cylinders on your Thule products and use the same key for all. - Replace the locks in your Thule product in a few easy steps - Including grip-friendly Thule Comfort key - Set of 4 locks, all using the same key
Premium trunk-mount bike carrier with raised platform designed to keep the rear lights and license plate visible, and fits wide range of vehicles including those with a spoiler. - Maximum fastening security to your vehicle with steel cables - Quick and easy mounting to car thanks to simple user interface and intuitive torque-limiting tightening system - Firm carrier hold and vehicle protection with twin hook attachment and rubber protection pads - Improved visibility of rear lights and license plate with raised platform design - Easy mounting of bikes with adjustable/removable bike arms and Thule AcuTight torque limiter knobs that click when optimal torque is reached - Accommodates up to 127cm/50" wheelbase bikes - Simple to fasten wheels, thanks to long wheel straps with pump buckles - Locks the bike to the bike rack and the bike rack to the roof racks (locks included) - Folds flat for easy transport and convenient storage - No assembly required - Possible to open vehicle trunk without any mounted bikes Technical specifications - Max number of bikes: 2 - Load capacity: 66 lb - Max bike weight: 33 lb - Dimensions: 23 x 50 x 47 in - Folded dimensions: 9.4 x 30.7 x 21.3 in - Weight: 27.6 lb - Carbon frame compatible - Rear lights and number plate visible with bikes mounted - One Key System compatible - Lockable bike-to-rack - Lockable rack-to-vehicle
Transport your bicycle quickly and safely with this lockable fork mounted carrier. Not compatible with Thule Aeroblade bars. - Easy-to-use stainless-steel skewer with oversized lever makes for secure loading and unloading - High-strength nylon composite head - Ratcheting wheel strap quickly secures back wheel to tray - Versatile design compatible with standard 9mm axles and most disc brakes. - Carries bikes with wheelbases up to 48" and tire widths up to 2.6". Even works with high profile rims - Carries 1 bike - 1 One-Key lock cylinder (sold separately) locks the bike to carrier and carrier to rack - Fits Thule rack systems or other round bars - Factory rack compatible with Thule Ride-On Adapter (sold separately)
Super rugged platform carrier with frame free clamping security for all types of bikes. - Carrier easily folds when not in use and tilts away from vehicle for rear access due to the HitchSwitch lever - Secure bikes quickly without frame contact with the frame free ratcheting arm - Bike to bike interference is eliminated with fully adjustable bike mounts - Ideal for carbon frames, mountain, downhill, and fat bikes as it fits 20 - 29” wheels and up to 5” tires without adapters - Includes STL (SnugTite Lock) for locking rack to receiver hitch - Carries 2 bikes - Carries up to 4 bikes with Thule T2 Classic Bike Add-on (sold separately, 2” receiver only)
Made for year-round adventures in any climate and features an extended canopy for additional privacy. - Can accommodate up to four people - Includes an extended private canopy entrance with removable annex - Constructed from coated 600 denier and a 260g poly-cotton blend made to withstand the elements of any season - Tent fabric is both UV and mold-resistant to withstand the elements of any season - Mesh panels offer plenty of ventilation and open for more airflow - Four, large internal pockets for storing gear and camping accessories - Includes a high-density foam mattress for added comfort Technical specifications: - Sleeping capacity: 4 person - Dimensions (Open): 122 x 72 x 52 in - Dimensions (Closed): 48 x 72 x 12 in - Sleeping footprint: 96 x 72 in - Peak internal height: 56 in - Weight: 190 lb - Static weight capacity: 650 lb - Minimum bar spread: 30.7 in - Base construction: Welded aluminum tube with insulation and aluminum cap sheet - Canopy fabric: 260g Polyester Cotton; 600D ripstop fabric with water-resistant ventilate coating; UV and mold resistant - Seasons: All - Mosquito screens: Yes - Internal frame: 3/4" (19mm) aluminum tube
The Swagman LOCKING THREADED HITCH PIN is specifically designed to prevent theft and wobble for Swagman's rack with threaded 1-1/4" and 2" receiver bar. - High-security key allows for easy access with only a half-turn to unlock - Premium chrome-plated for maximum rust protection - Keeps Swagman hitch racks secure and stable - Unique hidden pin cylinder for added security - Fits 1 1/4" and 2" Universal-foot-equipped Swagman racks - Threaded
Securely transport up to two bikes with Swagman's Chinook. The platform style requires minimal lifting to load bikes and the adjustable, locking hooks secure your bike's frame to the rack. - Tilts down to allow access to rear-of-vehicle, even while bikes are loaded - Fits most frame sizes, shapes, and styles - Fits 1-1/4" and 2" hitch receiver - Adjustable locking hooks secure frame to rack - Locking hitch pin - Carries up to 2 bikes - Wheel ratchet straps firmly hold bikes and secure wheels - Fat tire trays sold separately - Max. load: 45 lbs. per bike
The Swagman eBike/Cruiser Bar Adapter creates a higher top tube for your bike by attaching below the stem and seat post of your bikes. This will allow the ratcheting arms of your bike to hold step-through and heavier-weight bikes securely by grabbing onto the adapter. - Fits: Cruiser, eBikes and Step Through bikes requiring a higher top tube for use on Platform Hitch Mount Racks. - Max Load: 35 lbs. per bike when used on a Hanging Rack - Telescopic bar fits multiple bike sizes - Adapter comes equipped with vinyl-coated hangers - User friendly quick release - 25"-31" Maximum Width
Adapt your Swagman bike rack to accommodate fat bikes with wheel trays specifically made for extra-wide tires. - Fat Bike Wheel Holder (set includes 1 inner, 1 outer wheel tray) - For use with Swagman's Quad 2+2 or Chinook bike racks
Le sac horizontal pour vélos de Swagman couvre rapidement et facilement jusqu'à deux vélos sur un support monté sur un attelage. Il est fabriqué en nylon enduit de polyuréthane résistant à l'eau, et il est doté de sangles et d'une grande ouverture à glissière pour un ajustement parfait.
Most decent mountain bikes these days come with 15mm through-axles up front. You have two options for mounting to a SeaSucker rack: use a somewhat-more-expensive Fork Up adapter, or use their dedicated 15/100mm fork mount. The 15mm fork mount is bolt-on, meant for riders who are always using their rack with their thru-axle bike. According to Seasucker's friend and MTB pro Macky Franklin: “The 15mm fork mount is perfect. So much steadier than using the adaptor.” If you’ve got a Boost front hub (15/110mm), make sure to get one of Seasucker's Boost Adapters (sold separately) to get the fit right.
- Converts 1-1/4" Hitch Receiver to fit 2" Hitch - Compatible with all current Saris Hitch Racks (contact Saris for older model compatibility).
What happens when you take the most popular trunk rack of all time and expand its vehicle compatibility by 20%? Spoiler Alert: you get the Bones EX. Cultivated in the mind of Italian designer Fabio Pedrini and brought to life in our Wisconsin-based facility, the Bones EX features a unique and game-changing leg. Featuring a leg that gracefully avoids contact with most plastic spoilers found on many of the best-selling sedans, hatch backs and SUVs, the Bones EX now fits 20% more vehicles than its legendary predecessor. And that’s not all. We’ve decked out the Bones EX with premium bike hold downs and a handy strap management system in a shade that never goes out of style. Product Features - Best fit around: fits 89% of the top vehicles sold, including those with spoilers. - VIP Treatment: premium bike hold downs that are easy to use and quick to load. - Clean, Sleek Look: integrated strap management eliminates flapping straps. - Strong & Rust-Free: injection-molded arms and legs keep the rack solid for years to come. - Carries 3 bikes (35lb/bike). - Has the largest vehicle compatibility of any trunk rack on the market – consult the Saris Fit Guide for approved fits. - Unique dog leg fits over most spoilers, including those on popular sedans, hatchbacks and SUVs. - Premium bike hold downs that are easy to use and quick to load. - Integrated strap management system provides clean look and eliminates flapping straps. - Best-in-class ratchet straps speedily fasten bike to the rack. - Strongest frame on the market. - Built with 100% recyclable materials. - Rust-free injection molded plastic. - Articulated rubber feet to protect paint. - Arc–based design separates bikes on different levels. - Patents issued and pending. - Lightweight at 11 lbs.
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
Don't leave your fat bike behind! Saris' Freedom Fat Tire Wheel Holders carry up to 5-inch-wide bicycle tires. Extra-long straps secure your bike to any Saris Freedom rack (sold separately).
$315.99 $394.99 20% Off
Éloignez-vous de votre galerie de toit. Le Gran Fondo vous offre un moyen plus facile et plus élégant de transporter votre vélo jusqu'au début de votre balade. Conçu pour fixer solidement deux vélos à l'arrière de votre voiture, le Gran Fondo berce votre vélo verticalement entre les feux arrière et la plaque d'immatriculation, ce qui le rend conforme à la réglementation de l'Union européenne. De plus, sa conception aérodynamique crée un effet de ligne de cadence, ce qui se traduit par une meilleure efficacité énergétique. Vous êtes maintenant prêt à rejoindre l'échappée.
Saris' Hatch Huggers fasten Saris racks (sold separately) to certain vehicles. They replace the regular straps for vehicles with glass hinge lines and vehicles with narrow gaps around the trunk.
Il suffit d'insérer le Hitch Tite de Saris dans le récepteur d'attelage pour donner à votre porte-vélos Saris (vendu séparément) une stabilité supplémentaire. Le Hitch Tite est compatible avec les supports Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On et T-RAX Sport.
Allumez-le Prenez la route de jour comme de nuit avec vos vélos préférés en remorque grâce à cette barre d'attelage. Connectez le système d'éclairage de votre véhicule à la barre d'attelage grâce au faisceau électrique à 4 broches inclus pour communiquer facilement les arrêts et les virages afin d'assurer un transport plus sûr. Compatible avec tous les porte-vélos Saris SuperClamp ou Freedom, y compris la collection d'attelages, cet accessoire de porte-vélos est le go-to pour encore plus de tranquillité d'esprit. Caractéristiques du produit Montrez vos mouvements : barres lumineuses pour les feux de circulation, de freinage et de virage. Connexion universelle : reliez les feux de votre véhicule à la barre lumineuse à l'aide du harnais universel à 4 broches. Polyvalent : compatible avec tous les supports d'attelage Freedom et SuperClamp, y compris les porte-bagages Saris.
Nobody's getting close to your bike with Saris' Locking Cable and Hitch Tite Combo. The Hitch Tite secures your rack to the car and is compatible with all current Saris Hitch Racks (sold separately). For additional protection, the included 8-foot, 10mm cable locks your bike to the rack. Walk away from your car knowing that others will only be able to admire your wheels from afar.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
$25.99 - $36.99
Evo's Fork Mount Carrier easily installs in your truck bed or anywhere else you need a simple fork mount carrier. The 15 and 20mm mounts use a Teflon sleeve to protect your axle, and the 9mm includes a QR skewer.
- Versatile: Accommodates all 15mm & 12mm thru-axles. - Flexible: Adapter for most roof racks (Thule, Yakima, Kuat) - Quick Assembly: Easy mount on any flat surface - Fully Adjustable: Thumb screw inserts allow for instant adjustments - Construction: Lightweight aluminum and steel
Page 1 of 2 Next page