Packs/Racks/Baskets

If one of the plugs of your Seat-Pack is defective, you can easily replace it. For Bike packing Seat-Pack. - 1x plug, 1x plug with webbing safety device, black

Do you want to install the Pannier Stabilizing Insert in your bag, but your bag doesn't have a prepared internal stiffening because it's a model from 2023 or earlier? No problem! With the Retro Fit Kit Stabilizing Insert, you can easily retrofit your bag yourself. Even bags with the QL3.1 mounting system are not an issue. Simply contact our customer service, and they will help you customize your bag accordingly.

If the release tab on your Saddle-Bag or Micro-Bag isn't working properly anymore or has been lost, you don't need to replace the entire system right away. With this replacement part, you can simply change the release tab and you'll be ready for your next adventure.

For all Commuter-Bag, Commuter-Bag Two and Rack-Pack Urban models. Need to replace a lost or broken buckle? - 1 X-Lite plastic side-release buckle (25 mm, black)

X-STEALTH 25 MM (AUXILIARY CLOSURE STRAP) New side-release buckles as replacement or update for your Back-Roller or Sport-Roller with QL2.1 mounting system. If the buckle for your Back-Roller or Sport-Roller with QL2.1 is broken or you want to update it to the new component (2023), you can replace it very easily. Contents - 1x buckle and 1x nut washer in black

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

For all Water-Bag, Water-Sack and Water-Belt models up to 1998. Has your water transport container sprung a leak? Simply replace the rubber sealing ring to conserve your precious water supplies. DETAILS: - 1 rubber sealing ring

For all Office-Bag models from 1999. If one of the straps on your Office-Bag ever tears, you can have it replaced along with the buckle by paying a visit to an upholsterer or shoemaker. DETAILS: - 1 25-mm side-release buckle with strap end

The Adapter (set of 2 for one mount) helps to adjust the mounting angle of the fork pack mount on front forks (45 degree braze-on base becomes 30 degrees) to prevent contact of the bags with the wheel or spokes. By mounting the two angle elements, the distance between fork pack and front wheel can be increased, which minimizes the risk of spoke contact if the braze-on base is in an unfavorable position on the fork.

Frame-Pack Mouting Straps black The upper Velcro straps for attaching your Frame-Pack or Frame-Pack Toptube no longer stick? No problem, you can easily reorder them. Content: 3x Velcro straps for fixing on the top tube

The Protective Cap Handlebar-Pack QR protects your handlebars from pressure or abrasion damage and also makes it possible to securely mount the pack on carbon handlebars. Simple press the caps onto the two contact surfaces of the mounting set and you can fasten the mounting set or the Handlebar-Pack QR as usual.

With this spare part you can replace the defective locking hook on your QL mounting rail. For all models with QL1/QL2/Ql2.1 system and motorcycle panniers. Content: - 1x locking hook (18mm) incl. fastening screws

The hook and loop on your Velocity does not stick properly anymore? With this self-replacing fleece flap, the hook and loop fastener will hold securely together again. For all Velocity models from 2020 on. CONTENT: - 1x fleece flap, 1x double nut washer, black

Replacement Buckle 50 mm for Messenger Bags, Velocity, and other Backpacks.

You have lost a clamping rubber to securely close your Frame-Pack RC or Frame-Pack Toptube? You can get a replacement here. - 3x clamping rubber, orange

Velcro tape set for replacing the Velcro fasteners on your Saddle Bag. This set provides an easy way to replace a broken or torn Velcro fastener for mounting the Saddle Bag to your seat post.

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

For all models with the QL1 system from 1993. Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? The QL1 screw set will allow you to continue your tour with no loss of waterproof performance even if a screw goes missing. For all models with the QL1 system from 1993 Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? The QL1 screw set will allow you to continue your tour with no loss of waterproof performance even if a screw goes missing. DETAILS: - 5 screws - 5 flange nuts

For all models with the QL2.1 system. Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? No problem. The screw set will help you make sure you'll be able to continue your tour with no loss of waterproof performance even if a few screws go missing. DETAILS: - 10 screws - 10 nuts

For all Rack-Pack models up to 1998. Complete side-release buckles (25 mm) for Rack-Pack, two sets that allow you to combine Rack-Pack (up to 1998) and Back-Roller models (from 1999).

For all Bike-Tourer models without magnetic closure. Need to replace a lost or broken buckle? DETAILS: - 1 plastic buckle (male and female ends, 40 mm, black)

For all models with the QL1 or QL2 system. Attach the 4 foam guards to your elliptical or semi-elliptical brackets to minimize wear to your bike rack. DETAILS: - 4 abrasion guards

Compression straps (pair), 20mm wide, available with Ladderlock plastic buckle made of plastic or metal pinch buckle.

Elliptical rail for lower anchoring hook (incl. screws) and all models with QL2 including Classic Panniers from 2007+

Attach any of Ortlieb's saddle bags (sold separately) to seats with coil springs using the Mounting Straps. Simply use the straps instead of the plastic mounting clip.

For all Office-Bag, Back-Roller and Sport-Roller models with Stealth buckles. Need to replace a pair of buckles? DETAILS: - 2 plastic Stealth buckles (25mm, black)

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

For all models with the QL2.1 system. Replace a lost or worn semi-elliptical bracket with a new bracket. DETAILS: - 1 semi-elliptical bracket and mounting screws for the QL2.1 system

For all models with the QL1 or QL2 system. Missing or defective screws or nuts? Get this screw-and-nut set to conveniently replace any defective or missing screws. - 12 screws - 12 plastic nuts

Round Monostay Adapter - Hardware included

In your bike bag with QL2.1 system is the edge protection defective? No problem, with this spare part you can easily renew it yourself. - Length: 25.5 cm; hole spacing: 10 cm. - Contents: 1x QL2.1 edge protector, 3x self-tapping screws incl. nut washers - Suitable for: for all Back-Roller and Bike-Packer models, Velo- and Bike-Shopper as well as Pedal-Mate

If the hooks on your Seat-Pack QR look different to the replacement hooks, that’s no problem at all. We have improved the replacement hooks so that they are suitable for more saddle models. - Hooks Seat-Pack QR - Shorter hooks for saddles with saddle edges that are pulled down far - Contents: 2x hooks with webbing

For all models with TIZIP zippers. Do you find your waterproof TIZIP zipper to be a little stubborn? No problem! DETAILS: - 1 tube of lubricant for TIZIP zippers - Contains: 8 gram

For all Back-Roller (except City models), Bike-Packer, Bike-Shopper, Bike-Tourer, Velo-Shopper, Sport-Roller (except City models) and Velocity models from 2001 This spare mounting set allows you to attach your outer pockets to other bags. DETAILS: - 2 attachment brackets - 4 screws - 2 cover brackets - 1 hole punch - 1 hole template

For all models, including the Back-Roller and Sport-Roller, with Stealth buckles Need to replace a pair of broken buckle? - 2 plastic buckles (male and female ends, 25 mm, black)

Hip belt for Vario PS, Velocity and Messenger Bag. Hip belt to expand your Vario PS or for replacing the hip belt on your Velocity (2020 model and later) or on your Messenger Bag (2022 model and later) Contents - 1x hip belt

The shoulder strap for your Ultimate Compact, Bike-Box, E-Glow, E-Mate, Velo-Shopper, Trunk-Bag RC or Bike-Tourer is just what you need to carry on once you reach your destination. CONTENT: - 1 shoulder strap with plastic pad

This Ortlieb shoulder strap is compatible with your Ultimate Six Plus handlebar bag as of 2015. For better wearing comfort, it is equipped with a shoulder pad. - 1 shoulder strap

For all Ultimate 3 to Ultimate Six models up to 1999 Shoulder strap for your Ultimate handlebar bag, including plastic shoulder pad. - 1 shoulder strap (approx. 115 cm, black)

Ortlieb's Velcro Extension greatly enlarges the carrying capacity of the Messenger Bag and Messenger Bag Pro (sold separately) especially if keeping the contents dry is not an issue.

Have peace of mind for bigger loads with the 3-band heavy duty universal PakYak Cargo Strap; use it to secure oversized items on the PakYak E+ cargo bike. - Elastic for versatile usage

You lost your chest strap on your Commuter-Daypack? You can get a replacement here. For all Commuter-Daypack models (City, Urban) CONTENT: - 1x chest strap, black

Elastic strap with lower hook for Vario hybrid packs. Provides additional support for heavy loads.

Adapter clamps for fastening the QL3.1 assembly set for luggage rack frames with a diameter of 11-16 mm. If the diameter of your luggage rack is too large, you can quite simply use the QL3.1 clamps to mount your QL3.1 assembly set on your luggage rack. Contents - 1 pair of mounting clamps including insert for racks with a tube diameter of 11-16 mm.

Replacement wire cord for your Handlebar Mounting Set. If the mounting wire for your handlebar adapter is defective, you can find the right spare part here. Contents - 1x wire cord with a length of 105 cm in black

Replacement hook and loop strap for the Seat-Pack. If the hook and loop strap on your Seat-Pack has broken, you can quickly and easily replace the fastener on your saddlebag with the replacement hook and loop straps for the Seat-Pack.

- MATERIAL: polyamide - LOAD: 1 Kg | 2.2 lbs

Mount a rack to any bike with this lightweight adapter that adds two M5 rear threaded eyelets to the seatpost. CONSTRUCTION • Aluminum

For all Rack-Pack Urban models with silver aluminum buckles on the sides. Four buckles for combining older Rack-Pack Urban models with Back-Rollers or Sport-Rollers on the rear rack (except City models).

Anchoring for panniers (all models prior to 2016)

The integrable mesh inner pocket with zipper for the Handlebar-Pack QR. For all small items, such as wallet, snacks, cell phone or keys.

For all models with the QL1 system Is the bracket on your bike pannier with the QL1 mounting system broken? Simply replace the bracket to get your faithful pannier back in action. - 1 QL1 bracket (4-hole) with mounting screws - Length 31cm - Hole spacing 11,5 - 6,5 - 11,5cm

Lost your Rack Three rest buttons? You‘ll find them again here. For the ORTLIEB luggage carrier Rack Three. CONTENT: - 3x buttons, 3x screws

Spare part for replacing a defective 3-hole QL2.1 mounting rail with a length of 31.5 cm. Has the QL2.1 mounting rail on your rear pannier finally given in? This spare part allows you to replace it. The rail is 31.5 cm long and has 3 holes with a 14.5 cm spacing. Fastening screws and nuts are included.

Spare part for replacing a defective 3-hole QL2.1 mounting rail with a length of 23.5 cm. Has the QL2.1 mounting rail on your rear pannier finally given in? This spare part allows you to replace it. The rail is 23.5 cm long and has 3 holes with an 11 cm spacing. Fastening screws and nuts are included.

The perfect addition to your Safe-it protective sleeve in sizes S to XXL. The attachment set allows you to quickly attach your mobile devices and maps, in their cozy waterproof sleeves, to any Ultimate handlebar bag (except for the Ultimate Compact). The set consists of four hooks and adjustable elastic cords. A smart solution ready for any weather and terrain! - Mounting set for protective sleeve Safe-it onto lid of handbar bag Ultimate - Allows fixing of Safe-it size S-XXL onto handlebar bag Ultimate - Mounting by means of four adjustable hooks and elastic cord - Compatible with all Ultimate handlebar bags, also earlier generations, except Ultimate Compact

For all Sport-Rollers, Front-Rollers and Sport-Packers with the QL1 system Is the bracket on your bike pannier with the QL1 mounting system broken? Simply replace the bracket to get your faithful pannier back in action. - Length 23cm - Hole spacing 7,5 - 6,5 - 7,5cm

For all Back-Roller and Sport-Roller models with the QL2.1 mounting system Was the auxiliary closure strap for your Back Roller or Sport-Roller damaged during your last bike tour? This spare part allows you to get ready for your next tour. DETAILS: - 1 plastic support buckle (25 mm) - 1 set of replacement screws

- UV stabilized stretch polyurethane strap - Securely fastens spare tube or gear to your frame - Won't absorb water and mud like a Velcro strap and won't scratch your frame