Packs/Racks/Baskets

If one of the plugs of your Seat-Pack is defective, you can easily replace it. For Bike packing Seat-Pack. - 1x plug, 1x plug with webbing safety device, black

Do you want to install the Pannier Stabilizing Insert in your bag, but your bag doesn't have a prepared internal stiffening because it's a model from 2023 or earlier? No problem! With the Retro Fit Kit Stabilizing Insert, you can easily retrofit your bag yourself. Even bags with the QL3.1 mounting system are not an issue. Simply contact our customer service, and they will help you customize your bag accordingly.

If the release tab on your Saddle-Bag or Micro-Bag isn't working properly anymore or has been lost, you don't need to replace the entire system right away. With this replacement part, you can simply change the release tab and you'll be ready for your next adventure.

For all Commuter-Bag, Commuter-Bag Two and Rack-Pack Urban models. Need to replace a lost or broken buckle? - 1 X-Lite plastic side-release buckle (25 mm, black)

X-STEALTH 25 MM (AUXILIARY CLOSURE STRAP) New side-release buckles as replacement or update for your Back-Roller or Sport-Roller with QL2.1 mounting system. If the buckle for your Back-Roller or Sport-Roller with QL2.1 is broken or you want to update it to the new component (2023), you can replace it very easily. Contents - 1x buckle and 1x nut washer in black

For all models from 1999 Need to replace a defective buckle? DETAILS: - 1 plastic, side-release buckle

Buckle ("Mojave") 25 mm, 1 pc. (male and female) for all models up to '98

For all Water-Bag, Water-Sack and Water-Belt models up to 1998. Has your water transport container sprung a leak? Simply replace the rubber sealing ring to conserve your precious water supplies. DETAILS: - 1 rubber sealing ring

For all Office-Bag models from 1999. If one of the straps on your Office-Bag ever tears, you can have it replaced along with the buckle by paying a visit to an upholsterer or shoemaker. DETAILS: - 1 25-mm side-release buckle with strap end

To avoid chafe marks on the handlebars, you can simply re-order these foam pads as a set of 5. CONTENT: - 5x distance pads, grey

The Adapter (set of 2 for one mount) helps to adjust the mounting angle of the fork pack mount on front forks (45 degree braze-on base becomes 30 degrees) to prevent contact of the bags with the wheel or spokes. By mounting the two angle elements, the distance between fork pack and front wheel can be increased, which minimizes the risk of spoke contact if the braze-on base is in an unfavorable position on the fork.

Frame-Pack Mouting Straps black The upper Velcro straps for attaching your Frame-Pack or Frame-Pack Toptube no longer stick? No problem, you can easily reorder them. Content: 3x Velcro straps for fixing on the top tube

The Protective Cap Handlebar-Pack QR protects your handlebars from pressure or abrasion damage and also makes it possible to securely mount the pack on carbon handlebars. Simple press the caps onto the two contact surfaces of the mounting set and you can fasten the mounting set or the Handlebar-Pack QR as usual.

With this spare part you can replace the defective locking hook on your QL mounting rail. For all models with QL1/QL2/Ql2.1 system and motorcycle panniers. Content: - 1x locking hook (18mm) incl. fastening screws

The hook and loop on your Velocity does not stick properly anymore? With this self-replacing fleece flap, the hook and loop fastener will hold securely together again. For all Velocity models from 2020 on. CONTENT: - 1x fleece flap, 1x double nut washer, black

Replacement Buckle 50 mm for Messenger Bags, Velocity, and other Backpacks.

You have lost a clamping rubber to securely close your Frame-Pack RC or Frame-Pack Toptube? You can get a replacement here. - 3x clamping rubber, orange

Velcro tape set for replacing the Velcro fasteners on your Saddle Bag. This set provides an easy way to replace a broken or torn Velcro fastener for mounting the Saddle Bag to your seat post.

For all models with the QL2.1 system. Inserts are available for the two upper 16-mm mounting hooks that come with the proven QL2.1 mounting system. The inserts allow you to securely attach your ORTLIEB pannier to virtually any bike rack with smaller tube sizes (16 mm). DETAILS (PER PANNIER): - 1 pair of 8-mm inserts - 1 pair of 10-mm inserts - 1 pair of 12-mm inserts

For all models with the QL1 system from 1993. Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? The QL1 screw set will allow you to continue your tour with no loss of waterproof performance even if a screw goes missing. For all models with the QL1 system from 1993 Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? The QL1 screw set will allow you to continue your tour with no loss of waterproof performance even if a screw goes missing. DETAILS: - 5 screws - 5 flange nuts

Models with the QL1 system from 2005; Models with the QL2 system. The right hook inserts allow you to securely attach your ORTLIEB pannier with its proven QL1 or QL2 mounting system (16 mm) to virtually any bike rack. - 2 inserts measuring 8 mm - 2 inserts measuring 11 mm

For all models with the QL2.1 system. Planning a long bike tour and interested in playing it safe when it comes to securing your panniers? No problem. The screw set will help you make sure you'll be able to continue your tour with no loss of waterproof performance even if a few screws go missing. DETAILS: - 10 screws - 10 nuts

For all Rack-Pack models up to 1998. Complete side-release buckles (25 mm) for Rack-Pack, two sets that allow you to combine Rack-Pack (up to 1998) and Back-Roller models (from 1999).

For all Bike-Tourer models without magnetic closure. Need to replace a lost or broken buckle? DETAILS: - 1 plastic buckle (male and female ends, 40 mm, black)

Compression straps (pair), 20mm wide, available with Ladderlock plastic buckle made of plastic or metal pinch buckle.

Elliptical rail for lower anchoring hook (incl. screws) and all models with QL2 including Classic Panniers from 2007+

Attach any of Ortlieb's saddle bags (sold separately) to seats with coil springs using the Mounting Straps. Simply use the straps instead of the plastic mounting clip.

This mounting set allows you to attach your Saddle-Bags to other bicycles. For all Saddle-Bag, MudRacer and Micro models. - 1 mounting set for Saddle-Bags, including screws

For all models with the QL2.1 system. Replace a lost or worn semi-elliptical bracket with a new bracket. DETAILS: - 1 semi-elliptical bracket and mounting screws for the QL2.1 system