Outils

- Made from heat-treated tool steel for the ultimate in strength and lasting performance. - Professional quality, precision sized for the perfect fit. - Fits all Campagnolo cassette lockrings and Record, Chorus, Centaur, and Athena bottom brackets. - Designed to work with Pedro's snap-channel Pro Socket Handle, a 24mm socket or wrench, or in a bench vise. Pedro's socket tools provide a professional quality, precision fit tools required to properly install, remove, and adjust modern drivetrain components. Pedro's designed each socket tool to fit perfectly, protecting the component and ensuring simple and safe usage for the mechanic. The Campy BB and Cassette Socket is designed to fit over Campagnolo bottom bracket spindles and work seamlessly with Pedro's snap-channel Pro Socket handle, any 24mm socket/wrench, or in a bench vise. Backed by Pedro's lifetime warranty.

Torque wrenches are an essential bicycle tool. The increase in carbon fiber bikes and components have driven this need. While carbon fiber allows for more optimal design and provides higher strength to weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer accurate to +/- 1% and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle design provides comfort and control ready for daily use while also storing two extra bits. - Infinite torque-limiting clutch design eliminates over-torquing - Magnetic socket drive accepts standard 1/4" hex bits. 4mm, 5mm, & T25 bits included - Ergonomic handle design provides comfort and control and stores extra bits

Il est essentiel de disposer de l'outil adéquat pour travailler sur des vélos modernes. Les outils à douille de Pedro fournissent les outils de qualité professionnelle et de précision nécessaires pour installer, retirer et ajuster correctement les composants des transmissions modernes. En étroite collaboration avec chaque fabricant, Pedro's a conçu chaque outil à douille pour qu'il s'adapte parfaitement, protégeant ainsi le composant et garantissant une utilisation simple et sûre pour le mécanicien. La douille de support inférieure cannelée est conçue pour fonctionner sans problème avec la poignée Pro Socket à encliquetage de Pedro, avec toute douille/clé de 24 mm, avec tout entraînement carré de 1/2" ou dans un étau d'établi (chacun vendu séparément). Pour les travaux difficiles sur le boîtier de pédalier, assurez-vous de consulter le support de douille BB (vendu séparément) conçu pour aider à maintenir en place la douille cannelée du boîtier de pédalier.

The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking

• Clé en Y avec douilles 8, 9 et 10 mm • Fabrication en chrome-vanadium forgé

Shop-quality, adjustable torque driver that limits torque applied to fasteners, preventing over-tightening and damage to lightweight components. The ATD-1.2 features all-metal internal construction with a comfortable, ergonomic composite molded grip. Each tool is assembled and calibrated at Park Tool's factory in Minnesota.

La 4ème édition du Grand Livre Bleu de la réparation de vélos est mise à jour avec les dernières informations, procédures et techniques et couvre tout, des ajustements mineurs aux révisions complètes. Le BBB-4 contient des instructions claires et détaillées, des photos couleur de haute qualité et des tableaux et graphiques utiles pour expliquer et démontrer des centaines de réparations. Rédigé par l'une des principales autorités mondiales en matière de réparation et d'entretien des vélos, le directeur de l'éducation de Park Tool, Calvin Jones, le Big Blue Book est le guide de référence parfait pour presque tous les mécaniciens de tous niveaux et pour chaque vélo. De nouvelles informations et de nouveaux sujets sont inclus dans la 4e édition du BBB : - 12 vitesses et 1x les groupes motopropulseurs - Pneus sans chambre à air - Freins à disque - Déplacement électronique - Nouveau contenu pour la construction de la roue - Mise à jour des normes relatives aux casques et au pédalier - Mise à jour des spécifications de couple - Mise à jour des tableaux de dépannage

Le BBT-22 est un outil de qualité d'atelier pour installer et retirer les cuvettes cannelées du boîtier de pédalier à 20 dents de Shimano et ISIS Drive. Fabriqué en acier coulé, le BBT-22 assure un engagement maximal avec la boîte de pédalier. Il peut être utilisé avec une clé dynamométrique de 3/8 de pouce, un tournevis à cliquet de 3/8 de pouce, une clé de 32 mm, la clé de démontage de roue libre Park FRW-1 (vendue séparément) ou une clé de 1 pouce.

A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive. The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage. Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including: - SRAM BSA DUB - Race Face Cinch - Rotor BSA30 - Zipp Vuma - Hawk Racing BB3086 - and more - 3/8" drive fitting

The BKD-1 Hydraulic Brake Bleed Kit will bleed most models of DOT-fluid-based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid. - Designed and built for home use and the rigors of daily commercial use - Includes two syringes, hoses with shutoff clips, multi-size bleed blocks and a unique attachable syringe mount - Housed in a rugged reusable case - Machined stainless steel and 7075 aluminum fittings to service SRAM, Hayes, Formula, Hope and other brands of DOT-fluid-based hydraulic brake systems - Replacement parts available - Brake fluid not included

The BKM-1 Hydraulic Brake Bleed Kit will bleed most models of mineral-oil-based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid. - Designed and built for home use and for the rigors of daily commercial use - Includes two syringes, hoses with shutoff clips, multi-size bleed blocks, bleed funnel and a unique attachable syringe mount - Housed in a rugged reusable case - Machined 7075 aluminum fittings to service Shimano, Magura, Clarks, Promax, Tektro, TRP and other brands of mineral-oil-based hydraulic brake systems - Replacement parts available - Brake fluid not included

Réalisez rapidement toute opération de décapsulation de bouteilles avec l'ouvre-bouteille BO-2 de Park. Cet outil ergonomique est fabriqué en acier inoxydable avec un revêtement en vinyle confortable.

Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.

Made from high precision, hardened Cro-Moly steel, Park's Bottom Bracket Tool (External Bearing) can be turned with a 3/8" drive wrench, 1" wrench, or Park Tool FRW-1 Freewheel Remover Wrench (each sold separately).

The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups with an outside diameter of 48.5mm (e.g. FSA MegaEvo).

The CC-4 is a drop-in style gauge that measures bicycle chain wear. The laser cut CC-4 accurately measures a long section of chain and strategically comes in contact with the chain in three places, quickly and easily taking the guesswork out of knowing when chain replacement is necessary. A worn chain will cause poor shifting as well as accelerate drivetrain wear. The tool works on any 5 to 12-speed derailleur chain (including SRAM AXS) and is designed to accurately indicate when a chain reaches .5% and .75% wear, the points at which most chain manufacturers suggest replacement.

Une chaîne sale entraîne un mauvais passage des vitesses et une usure inutile de pièces coûteuses. Le Chain Gang contient tout ce qu'il faut pour nettoyer rapidement et facilement la chaîne, les engrenages de la roue libre et les plateaux. Le Chain Gang comprend : - Laveur de chaîne Cyclone CM-5.3 - Brosse GearClean GSC-1 - Bouteille de 8 oz de Bio ChainBrite Le CG-2.4 fonctionne sur presque tous les vélos, y compris les vélos à vitesse multiple, à vitesse unique et les vélos électriques.

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

Acier à outils en alliage traité thermiquement, base d'un pouce qui convient à une clé ou à un étau d'établi. La construction à paroi mince permet une utilisation sans démontage des cônes et des contre-écrous. Le FR-5 possède 12 cannelures d'environ 23,4 mm de diamètre. - S'adapte à Shimano, SRAM, Sunrace, Suntour, Chris King et autres cassettes de verrouillage. - Convient aux cassettes SRAM XX1 à 11 vitesses - Convient également aux bagues de frein à disque Shimano - Utilisez toujours une brochette à dégagement rapide pour maintenir l'outil en place et bien serrer les dents lors du desserrage ; pour les essieux solides, utilisez l'écrou d'essieu

The Park Tool FR-5.2GT is designed specifically for use when removing and installing cassette lockrings from thru axle hubs. -Utilizes a 12mm guide pin to stabilize the tool during use - Fits 12-spline cassette lockrings from Shimano, SRAM (including 1x), SunRace, SunTour, Chris King and others (23.5mm diameter) - Fits some Shimano and similar disc brake rotor lockrings

Acier à outils en alliage traité thermiquement, base d'un pouce adaptée à une clé ou à un étau. La construction à paroi mince permet une utilisation sans démontage des cônes et des contre-écrous. Le FR-5.2G possède 12 cannelures d'environ 23,4 mm de diamètre. - Convient à Shimano, SRAM, SunRace, SunTour, Chris King et autres cassettes de verrouillage. - Convient aux cassettes SRAM XX1 à 11 vitesses - Convient également aux garnitures de frein à disque Shimano - La goupille de guidage stabilise l'outil

Park's FR-5G Cassette Lockring Tool fits most cassette lockrings from Shimano, SRAM, SunTour and SunRace. Made from heat-treated tool steel, the FR-5G features an extra-long splined body to prevent slippage and a guide pin to ensure the tool is in straight, preventing stripped lockrings. And, it can also be used to remove and install Shimano disc brake rotors. The FR-5G requires the use a chainwhip tool to prevent the cassette from turning during lockring removal.

A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.

L'extracteur de manivelle compact de Park est utilisé pour retirer les pédaliers Shimano Octalink, ISIS Drive et les pédaliers à cône carré. Il comprend 2 embouts rotatifs (16,3 et 11,3 mm) pour faciliter le travail. C'est un outil idéal pour votre trousse à outils de voyage et à domicile.

Dans la tradition de nos outils pliants de qualité supérieure, le BO-4 est une combinaison de tire-bouchon et de décapsuleur avec un couteau/feuille de découpe. Ce multi-outil se plie pour le rangement et comporte tous les mécanismes en acier inoxydable logés dans un boîtier en aluminium forgé. C'est un outil de qualité supérieure pour les boissons, parfait pour l'établi, la boîte à outils ou le bar à vin.

Park's Crank Puller is for removing crankarms on Shimano's splined, oversize, pipe-billet bottom brackets. It employs a long handle and a fine thread for the leverage and torque needed to remove tight arms. Park's unique rotating tip ensures smooth operation and long life. (The CCP-44 does not fit standard square or tapered bottom brackets.)

A favorite of shop mechanics for over 30 year's, Park's CCP-22 Crank Puller removes crankarms that feature square tapers, and those that fit on Power Drive and Power Spline bottom bracket interfaces. The long, comfortable, built-in handle and fine thread provide the leverage needed to remove even the tightest crankarms. And, there's a rotating tip to ensure smooth operation and long life.

-Se glisse dans les pattes arrière et remplace la roue arrière -Convient à tous les dérailleurs et toutes les chaînes de 1/8 po -Permet de changer de vitesse et convient aux fourches à patte ouverte ou avec essieu transversal d'au plus 12 mm

The Park FR-2 Freewheel Remover fits SunTour two-notch freewheels. It's built thin so that removing axle parts is unnecessary. And, it's constructed of durable heat-treated steel. (Not recommended for use with SunTour 4- and 6-notch freewheels.)